The Perkins 2506A-E15TAG1 is a 15.2 L, six-cylinder ElectropaK diesel engine for stationary 50 Hz power-generation projects. At 1500 rpm, it delivers 364 kWe / 455 kVA prime power and 400 kWe / 500 kVA standby power.
This Fuel Optimised 2500 Series engine combines mechanically actuated unit injectors with full-authority electronic control, turbocharging and air-to-air charge cooling. Engine supply and replacement parts should be confirmed by the complete Build List, Engine Serial Number and generator-set application.
- 15.2 L vertical inline six-cylinder diesel engine
- Turbocharged and air-to-air charge cooled
- 1500 rpm / 50 Hz generator-set configuration
- 364 kWe / 455 kVA prime output
- 400 kWe / 500 kVA standby output
- Fuel Optimised emissions position
- ElectropaK package for generator integration
- Build List and complete ESN verification for supply and parts
Typical Lead Time: 3–4 weeks, subject to stock and final configuration.
Quotation: Configuration-based quote within 24 hours.
Supply Channel: Genuine Perkins products supported by first-tier distributor channels.
Export Experience: Supplied to customers in more than 30 countries.
Warranty: 12 months, subject to confirmed supply condition and contract terms.
Send the engine dataplate, Build List and complete ESN for a configuration-specific quotation.
Perkins 2506A-E15TAG1 Technical Specifications
| Parameter | Specification | Selection Note |
|---|---|---|
| Package | ElectropaK generator-drive engine | Engine package only; not a complete diesel generator set. |
| Configuration | 6 cylinders, vertical inline, four-stroke | Designed for stationary electric-power generation. |
| Displacement | 15.2 L (927.6 in³) | Commonly referred to as the Perkins 15-litre platform. |
| Bore × stroke | 137 × 171 mm | Internal components still require Build List and ESN verification. |
| Compression ratio | 16.0:1 | Do not use compression ratio alone to identify overhaul parts. |
| Aspiration | Turbocharged and air-to-air charge cooled | Cooling performance must suit altitude, ambient temperature and enclosure airflow. |
| Combustion | Direct injection | Fuel-system components must match the approved engine record. |
| Fuel control | Mechanically actuated unit injectors with full-authority electronic control | ECM calibration, injectors, sensors and harness must match the rating. |
| Rated speed on this page | 1500 rpm | Configured for 50 Hz generator-set operation. |
| Governing | ISO 8528-5 class G3 with isochronous capability | Completed genset response also depends on controller and alternator integration. |
| Rotation | Anti-clockwise from the flywheel end | Confirm coupling and alternator arrangement before replacement. |
| Lubricating-oil capacity | Approximately 62 L | Final service quantity depends on sump and installation. |
| Coolant capacity | Approximately 58 L | The completed generator-set cooling circuit may require additional coolant. |
| Emissions position | Fuel Optimised | Not presented as compliant with a harmonised regulated emissions tier. |
| Exhaust aftertreatment | None specified | Destination-country and site requirements must be checked before supply. |
1500 rpm / 50 Hz Power Output
This page covers the TAG1 1500 rpm configuration. Final electrical output depends on the approved engine rating, alternator efficiency, controller settings, cooling system and site derating.
| Duty | Gross Mechanical Output | Net Mechanical Output | Typical Electrical Output | Operating Position |
|---|---|---|---|---|
| Prime | 412 kWm (approximately 552 hp) | 396 kWm (approximately 531 hp) | 364 kWe / 455 kVA | Variable-load operation with extended annual use under the applicable prime-power definition. |
| Standby | 451 kWm (approximately 605 hp) | 434 kWm (approximately 582 hp) | 400 kWe / 500 kVA | Emergency operation when the normal electrical supply fails. |
The kVA values assume a typical 0.8 power factor and approximately 92% alternator efficiency. Standby output should not be selected as a continuous base-load rating.
Prime and Standby Duty Selection
| Duty | Typical Use | Operating Limitation | Selection Risk |
|---|---|---|---|
| Prime power | Variable-load generation where the engine is a regular power source | Unlimited annual hours within the published load-factor definition; 10% overload may be available for 1 hour in every 12 hours | Do not size the set only from the maximum connected load. |
| Standby power | Emergency backup when the normal utility or primary source fails | Limited annual use under the applicable rating definition; no overload | Do not use the 500 kVA standby rating for continuous production power. |
Reference Fuel Consumption at 1500 rpm
Fuel-use figures are planning references and may vary with the approved Build List, load profile, alternator efficiency, fuel density, fan demand, ambient temperature and altitude.
| Operating Point | Approximate Fuel Use | Planning Note |
|---|---|---|
| Standby rating | Approximately 104 L/h | Use only for emergency standby calculations. |
| 100% prime load | Approximately 95 L/h | Useful for full-load fuel-tank and operating-cost planning. |
| 75% prime load | Approximately 72 L/h | Often more representative of variable-load operation. |
| 50% prime load | Approximately 50 L/h | Do not extrapolate linearly to lower loads. |
For final tank sizing, request the rating sheet for the confirmed engine and calculate against the actual hourly load profile.
ElectropaK Equipment and Installation Data
ElectropaK is a generator-drive engine package rather than a complete genset. The exact supplied scope varies by Build List, production date and quotation.
| System | Common Family Equipment | Order Check |
|---|---|---|
| Air inlet | Engine-mounted air filter | Confirm rain hood, restriction indicator and installation air path if required. |
| Cooling | Gear-driven circulating pump, belt-driven fan and radiator with air-to-air charge cooler | Confirm whether the radiator is mounted or supplied loose and verify ambient capability. |
| Electrical | 24 V starter, 24 V 70 A charging alternator, ECM, wiring looms and sensors | Confirm starter arrangement, connectors and customer-controller interface. |
| Protection | Three-level engine protection system | Confirm shutdown and alarm integration with the selected controller. |
| Flywheel | SAE J620 size 14 high-inertia flywheel | Confirm torsional compatibility with the selected AC alternator. |
| Flywheel housing | SAE ½ flywheel housing | Check coupling, adaptor and alternator-interface dimensions. |
| Fuel system | Fuel cooler, primary filter/water separator and replaceable Ecoplus elements | Confirm connection points and customer-supplied day-tank arrangement. |
| Lubrication | Wet sump, oil cooler, filler, dipstick and full-flow Ecoplus filter | Confirm sump orientation and service access. |
| Mounting | Front engine mounting bracket | Confirm base-frame design, rear support and alignment procedure. |
Reference Package Dimensions
| Item | Reference Value | Engineering Note |
|---|---|---|
| Length | Approximately 2657 mm | Final dimensions depend on the selected equipment and options. |
| Width | Approximately 1120 mm | Allow additional service and airflow clearances. |
| Height | Approximately 1718 mm | Check lifting, exhaust, radiator and roof clearance. |
| Dry weight | Approximately 1633 kg (3601 lb) | Confirm shipping weight and center of gravity for the quoted engine. |
Request a configuration drawing before finalising the base frame, enclosure, lifting arrangement or service clearances.
Build List and ESN Verification
The model designation identifies the engine family and TAG1 power node, but it does not define every fitted component. Use the complete Build List and ESN to verify the ECM, cooling equipment, electrical system, flywheel arrangement and replacement parts.
| Identification Item | Example | Purpose |
|---|---|---|
| Engine model | 2506A-E15TAG1 | Identifies the base engine family and TAG1 rating. |
| Build List | MGAF5076, MGAF5008, MGA5076 or MGA5008 | Identifies the production specification and fitted component combination. |
| Engine Serial Number | Complete ESN from the dataplate | Links the engine to its individual manufacturing and service record. |
| Rated speed and duty | 1500 rpm, prime or standby | Prevents selection of the wrong output or calibration. |
| Dataplate photograph | Clear image of every field | Reduces transcription errors during quotation and parts matching. |
MGAF and MGA Build List References
MGAF5076 / MGAF5008 and MGA5076 / MGA5008 may appear as related Build List references, but the codes should not be treated as universally interchangeable from the suffix alone. Confirm the complete Build List, ESN and applicable component supersessions before approving an engine or part.
1500 rpm and 1800 rpm Family Configurations
The wider 2506A-E15TAG family includes both 1500 rpm and 1800 rpm products, but TAG1 is the 1500 rpm specification covered on this page. For a 60 Hz replacement project, verify the correct TAG model, ECM calibration, AC alternator, voltage, cooling and controller settings instead of assuming a controller-only conversion.
2506A, 2506C and 2506D Compatibility
The 2506A, 2506C and 2506D variants share a common 15.2 L platform, but different emissions positions, calibrations and supplied equipment can affect complete-engine and component compatibility.
| Compatibility Check | Items to Compare |
|---|---|
| Mechanical interface | Mounts, flywheel, housing, coupling, dimensions and alternator alignment |
| Electrical interface | ECM, harness, starter voltage, charging alternator, sensors and controller connections |
| Rating | 1500 rpm, 50 Hz, prime or standby duty and ECM calibration |
| Cooling | Radiator, charge cooler, fan, enclosure airflow and ambient capability |
| Emissions position | Fuel Optimised, regulated emissions requirement and destination-market acceptance |
| Parts | Build List, ESN, existing part number and current supersession |
Any A-to-C, C-to-D or D-to-A replacement should be handled as an engineering substitution rather than a direct model-name replacement.
Replacement Parts and Fitment Control
Do not rely on one fixed parts list for every 2506A-E15TAG1. Production changes and superseded part numbers can affect fitment, especially for bearings, pistons, starters, filters, pumps and electronic components.
| Parts Group | Typical Requirements | Matching Information |
|---|---|---|
| Routine service | Oil filters, fuel filters, water-separator elements, belts and seals | Build List + ESN + service interval |
| Fuel system | Lift pump, fuel cooler, filter housing, injectors and lines | Build List + ESN + existing component number |
| Cooling system | Coolant pump, thermostat, fan, belts, radiator and charge-cooler parts | Build List + ESN + cooling-package configuration |
| Starting and charging | Starter, charging alternator, solenoid, sensors and wiring | System voltage + Build List + ESN + connector details |
| Cylinder head and valve train | Valves, springs, guides, rocker parts and head gasket | Build List + ESN + inspection results |
| Overhaul components | Pistons, rings, liners, bearings, thrust washers and gasket sets | Build List + ESN + standard or repair-size requirement |
| Electronic control | ECM, harness, speed, pressure and temperature sensors | ECM number + calibration + Build List + ESN |
Reference Part Numbers from Existing Records
| Part | Reference Number | Fitment Status |
|---|---|---|
| Main bearing kit | KRP3118 / KRP3122 | Confirm standard or repair size by Build List and ESN. |
| Thrust washer kit | KRP3206 | Verify crankshaft and block specification. |
| Cylinder liner | CH11180 | Match to the confirmed piston and block configuration. |
| Big-end bearing kit | KRP3016 | Confirm journal condition and required size. |
| Piston kit | KRP3030 | Verify piston specification and cylinder condition. |
| Piston-ring kit | KRP3018 | Match to the confirmed piston and liner specification. |
| Lift pump | KRP1721 | Verify the fitted fuel-system arrangement. |
| Starter motor | CH12807 / CH11089 / CH12045 | Confirm voltage, mounting and electrical connections. |
| Charging alternator | CH11087 | Verify output, mounting and connector arrangement. |
| Fuel filters | CH10930 / CH10931 | Confirm primary and secondary filter positions. |
Supply, Logistics and Warranty
Commercial support is a key part of the supply offer. Final delivery and warranty terms should still be recorded in the quotation so the buyer can match them to the selected engine condition, quantity and destination.
| Commercial Advantage | Supply Position |
|---|---|
| Supply channel | Genuine Perkins products supported by first-tier distributor channels |
| Quotation response | Configuration-based quotation within 24 hours after receiving the required engine and delivery information |
| Typical lead time | 3–4 weeks, subject to stock, final configuration, inspection scope and quantity |
| Export experience | International supply experience covering more than 30 countries |
| Export documentation | Commercial invoice, packing list, transport document and certificate of origin where applicable |
| Shipping | FCL or LCL shipment with export packing from the confirmed dispatch location |
| Pre-shipment control | Dataplate, Build List, ESN, supplied accessories and visible condition recorded before dispatch |
| Warranty | 12 months or the operating-hour limit stated in the contract, subject to confirmed engine condition and warranty terms |
Warranty Records and Claim Information
| Record | Required Information |
|---|---|
| Engine identity | Model, complete Build List, ESN and dataplate photograph |
| Commissioning | Date, installation record, operating parameters and responsible technician |
| Maintenance | Operating hours, oil, coolant, filters and scheduled service records |
| Fault evidence | Fault code, symptoms, photographs, video and controller data where available |
| Transport damage | Photographs before unpacking and notation on the delivery receipt |
Warranty generally excludes incorrect installation, improper commissioning, contaminated fuel, unsuitable lubricant or coolant, unauthorised modification, normal consumables and unreported transport damage. The signed quotation and warranty document remain the controlling terms.
Information Required for a Quotation
| Required Information | Example |
|---|---|
| Required product | Complete engine, replacement engine, long block or parts |
| Engine identity | 2506A-E15TAG1, complete Build List, ESN and dataplate photo |
| Duty and output | 364 kWe / 455 kVA prime or 400 kWe / 500 kVA standby |
| Frequency and speed | 50 Hz / 1500 rpm |
| Replacement application | Existing genset, AC alternator, controller and installation photographs |
| Quantity and destination | Required quantity, country, city or seaport and preferred Incoterm |
| Special requirements | Inspection, testing, packing, documentation and warranty requirements |
Frequently Asked Questions
What output does the 2506A-E15TAG1 provide?
At 1500 rpm, it provides 364 kWe / 455 kVA prime power and 400 kWe / 500 kVA standby power for a typical 50 Hz generator-set application.
What does Fuel Optimised mean?
It is Perkins’ emissions position for this engine family. It should not automatically be described as compliant with a specific regulated emissions tier without destination-specific documentation.
Is ElectropaK a complete generator set?
No. ElectropaK is a generator-drive engine package. The AC alternator, controller, base frame, fuel tank, starting batteries, silencer and enclosure are included only when specifically stated in the quotation.
Can the TAG1 engine be used at 1800 rpm?
This page covers the 1500 rpm TAG1 specification. For a 60 Hz project, verify the correct 1800 rpm model and the complete engine, alternator, controller, voltage and cooling configuration.
Are MGAF5076 and MGA5076 automatically interchangeable?
No universal assumption should be made. Compare the complete Build List, ESN, rating and applicable part supersessions before approving an engine or component.
Can parts be ordered using only “2506A-E15TAG1”?
The complete Build List and ESN are required for reliable identification. Existing part numbers and component photographs should also be supplied when available.
What fuel and lubricating oil should be used?
Use diesel fuel and lubricating oil that meet the specifications stated in the applicable Perkins Operation and Maintenance Manual for the confirmed engine. Fuel quality, viscosity grade and service interval should be selected for the local climate and operating conditions.
Is the typical lead time three to four weeks?
Yes, the typical quoted lead time is three to four weeks. Final timing is confirmed against stock, configuration, inspection scope, quantity and destination.
What warranty is provided?
A 12-month warranty is available subject to the confirmed supply condition, operating-hour limit, commissioning requirements and contract terms.
Request a 2506A-E15TAG1 Configuration Check
Send the engine dataplate, complete Build List, ESN, required duty, quantity and destination. For replacement projects, also provide photographs of the existing engine, alternator, controller, mounts and connection points.
Submit the engine details for configuration, supply-scope and parts-compatibility review.
Get Your Engine & Parts Quote
Upload your parts list or send your ESN — we reply within 30 minutes. Engine down? Need fast replacement? Contact us to check today’s stock & delivery time.
